​The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air.

PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Benefit

Ready to use out of the box

PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.

Detect over 100 toxic gases using DrägerSensors

​Electrochemical DrägerSensors provide continuous detection even under the harshest conditions. Most DrägerSensors offer a very wide temperature range from -40 °C to +65 °C (-40 °F to +149 °F). The built-in memory contains all the information relating to calibration and configuration. The sensor is pre-calibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.

Flexible communications

​PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.

Rugged and compact housing

​PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it easily to fit most applications. Built-in cable glands make it easy to install.

Advanced display with diagnostics

​The large, illuminated backlit graphic display shows status information clearly and in a format that’s easy to interpret. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Monitor remote areas up to 30 meters away

​A remote sensor enclosure with a cable up to 30 metres long, designed for use in ordinary locations, is available for electrochemical sensors.

Images & Videos

Find this product

Key Facts

Fixed Type

Transmitter

Cable entry

M20 or 3/4" NPT

Display

Yes

Intrinsic Safety

Νο

Flameproof

Yes

Increased Safety

Yes

SIL

No

4-20 mA

Yes

Bus

Yes

HART®

Yes

Wireless

No

Technical Data

Display

Yes

Weight

4 Kg

Dimensions (W × H × D)

0.28×0.15×0.13 m

Degree of protection

IP65/66/67

Power Supply

10 to 30 V DC, 3-wire

Temperature (operation)

-40°C – 65°C

Humidity

0 to 100 % r.h., non-condensing

Pressure (hPa)

700 – 1300

Housing Material

Epoxy coated copper-free aluminum or stainless steel SS316 L

Approvals

ATEX

Yes

IECEx

Yes

CE

Yes

GOST (EAC)

Yes

Performance approval

Yes

Shipping approval

Yes

UL

Yes

CSA

Yes

FM

No

Product Datasheet

Download

More than the sum Brochure

Download

Skip to content

WordPress database error: [Unknown column 't.term_order' in 'order clause']
SELECT DISTINCT `t`.* FROM `wp_terms` AS `t` LEFT JOIN `wp_term_taxonomy` AS `tt` ON `tt`.`term_id` = `t`.`term_id` LEFT JOIN `wp_term_relationships` AS `tr` ON `tr`.`term_taxonomy_id` = `tt`.`term_taxonomy_id` WHERE ( `tt`.`taxonomy` = 'region' ) ORDER BY `t`.`term_order` ASC, `t`.`name`, `t`.`term_id` LIMIT 0, 15