​The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air.

PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor,.

Οφέλη

Ready to use out of the box

PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.

Detect over 100 toxic gases using DrägerSensors

​Electrochemical DrägerSensors provide continuous detection even under the harshest conditions. Most DrägerSensors offer a very wide temperature range from -40 °C to +65 °C (-40 °F to +149 °F). The built-in memory contains all the information relating to calibration and configuration. The sensor is pre-calibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.

Flexible communications

​PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.

Rugged and compact housing

​PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it easily to fit most applications. Built-in cable glands make it easy to install.

Advanced display with diagnostics

​The large, illuminated backlit graphic display shows status information clearly and in a format that’s easy to interpret. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Monitor remote areas up to 30 meters away

​A remote sensor enclosure with a cable up to 30 metres long, designed for use in ordinary locations, is available for electrochemical sensors.

Εικόνες και Βίντεο

Βρείτε αυτό το προϊόν

Βασικά Στοιχεία

Fixed Type

Transmitter

Cable entry

M20 or 3/4" NPT

ΑΝΑΛΥΣΗ

Ναι

Intrinsic Safety

Νο

Flameproof

Ναι

Increased Safety

Ναι

SIL

Όχι

4-20 mA

Ναι

Bus

Ναι

HART®

Ναι

Wireless

Όχι

Τεχνικά Δεδομένα

ΑΝΑΛΥΣΗ

Ναι

ΒΑΡΟΣ

4 Kg

ΔΙΑΣΤΑΣΕΙΣ (Β * Π * Υ)

0.28×0.15×0.13 m

ΒΑΘΜΟΣ ΠΡΟΣΤΑΣΙΑΣ

IP65/66/67

Power Supply

10 to 30 V DC, 3-wire

Temperature (operation)

-40°C – 65°C

Humidity

0 to 100 % r.h., non-condensing

Pressure (hPa)

700 – 1300

Housing Material

Epoxy coated copper-free aluminum or stainless steel SS316 L

Εγκρίσεις

ATEX

Ναι

IECEx

Ναι

CE

Ναι

GOST (EAC)

Ναι

Performance approval

Ναι

Shipping approval

Ναι

UL

Ναι

CSA

Ναι

FM

Όχι

Δεδομένα Προϊόντος

Λήψη

More than the sum Brochure

Λήψη

Μετάβαση στο περιεχόμενο

Σφάλμα στη βάση δεδομένων: [Unknown column 't.term_order' in 'order clause']
SELECT DISTINCT `t`.* FROM `wp_terms` AS `t` LEFT JOIN `wp_term_taxonomy` AS `tt` ON `tt`.`term_id` = `t`.`term_id` LEFT JOIN `wp_term_relationships` AS `tr` ON `tr`.`term_taxonomy_id` = `tt`.`term_taxonomy_id` WHERE ( `tt`.`taxonomy` = 'region' ) ORDER BY `t`.`term_order` ASC, `t`.`name`, `t`.`term_id` LIMIT 0, 15